Xpel Ceramic Window Tint legal limits in Ontario,Canada
As a window film specialist, it's important to understand the legal requirements for window tinting in different regions. In Ontario, Canada, there are specific laws and regulations governing the use of window tint on vehicles. In this blog, we'll take a closer look at the legal limit for window tint in Ontario.
Legal Limit for Window Tint in Ontario
The Ontario Highway Traffic Act specifies that the front windshield and front side windows of a vehicle must allow at least 70% of visible light to pass through. This means that the tint applied to these windows must not be darker than 30%.
The rear side windows and the rear windshield of a vehicle, on the other hand, can be tinted to any level, as long as the vehicle has side mirrors that provide an adequate view of the surrounding area. This means that the tint applied to these windows can be darker than 30%, but it is still recommended to not go beyond the factory-installed privacy glass tint on your vehicle.
It's important to note that the legal limit for window tint in Ontario applies to all vehicles, including cars, trucks, and SUVs. Additionally, the laws surrounding window tinting also apply to aftermarket window films that are applied to the vehicle's windows.
Consequences of Violating the Window Tinting Laws in Ontario
Violating the window tinting laws in Ontario can result in fines and other penalties. If a police officer pulls over a vehicle and finds that the window tint is too dark, the driver can be issued a ticket and required to remove the tint from the windows.
The fine for violating the window tinting laws in Ontario can range from $85 to $500, depending on the severity of the violation. Additionally, drivers who repeatedly violate the window tinting laws can have their driver's license suspended or even face imprisonment.
Conclusion
In summary, the legal limit for window tint in Ontario is 30% for the front windshield and front side windows of a vehicle, while the rear side windows and rear windshield can be tinted to any level, as long as the vehicle has side mirrors that provide an adequate view of the surrounding area. It's important to follow these laws to avoid fines and other penalties, as well as to ensure the safety of yourself and other drivers on the road. If you're interested in tinting your vehicle's windows, be sure to consult with a qualified window film specialist who can provide you with the right tinting solution that meets legal requirements.
What is Ceramic Window Tint actually made of?
If you're looking for a high-quality window tinting solution that offers excellent heat rejection and UV protection, ceramic window tint is an excellent option. Ceramic window tint is a popular choice among vehicle and home owners because it provides excellent visibility while blocking heat and UV rays. In this blog, we'll take a closer look at what ceramic window tint is made of and what makes it such a popular choice.
What is Ceramic Window Tint Made Of?
Ceramic window tint is made of ceramic particles that are non-conductive and non-metallic. The ceramic particles are embedded in a thin film made of polyester, which is then adhered to the inside of the glass. Unlike other types of window tinting films, ceramic window tint does not contain any dyes or metals that can interfere with cellular or GPS signals.
The ceramic particles in the film are designed to reject heat and block UV rays without reducing visibility. These particles are transparent, so the film appears nearly invisible once it is applied to the glass. The result is a high-quality tinting solution that provides excellent protection without sacrificing clarity.
What are the Benefits of Ceramic Window Tint?
There are several benefits to using ceramic window tint over other types of window tinting solutions. Here are some of the most significant advantages:
Heat Rejection: Ceramic window tint is designed to block up to 50% of the sun's heat, making it an excellent solution for reducing interior temperatures. This is particularly important for vehicle owners, as it can help to reduce the load on the air conditioning system.
UV Protection: Ceramic window tint blocks up to 99% of UV rays, which can cause damage to skin and upholstery. By blocking UV rays, ceramic window tint helps to protect both the vehicle's occupants and the interior of the vehicle itself.
Clarity: Because ceramic window tint does not contain any dyes or metals, it provides excellent visibility both during the day and at night. This makes it an excellent solution for drivers who need to be able to see clearly in all conditions.
Non-Interference: Because ceramic window tint does not contain any metals, it does not interfere with cellular or GPS signals. This is particularly important for drivers who rely on GPS navigation.
In summary, ceramic window tint is a high-quality solution for those looking to reduce heat, block UV rays, and improve visibility. Its non-conductive and non-metallic composition makes it an excellent choice for vehicle and home owners who need to maintain cellular and GPS signals. If you're interested in ceramic window tint, be sure to speak with a qualified window tinting professional to learn more about your options.
Why AVOTTO is the Best Paint Protection Film Shop in the Greater Toronto Area
As car owners, we all want to protect our vehicles from the elements and keep them looking as good as new. Paint protection film (PPF) is a popular solution, but finding the right shop to install it can be a challenge. That's where AVOTTO comes in. We are the best paint protection film shop in the greater Toronto area, and we are here to tell you why.
Expert Installers: Our team of installers are highly skilled and experienced, and they have a passion for providing the highest quality PPF installations. They understand the importance of a perfect installation and take great care to ensure that every piece of film is precisely cut and applied.
High-Quality Products: We use only the best PPF product available, XPEL. This product is tested and proven to provide the best protection for your car's paint, ensuring that it will look great for years to come.
Clean and Hygienic Environment: When it comes to installing PPF, hygiene is key. Dust and debris can get trapped behind the film, ruining the appearance of your car. Our shop is clean and hygienic, and we take great care to ensure that the environment is as clean as possible before, during, and after each installation.
Affordable Prices: We understand that PPF can be an expensive investment, and we are committed to providing our services at affordable prices. We believe that everyone should have access to the best protection for their car's paint, and we work hard to ensure that our prices are competitive and fair.
Customer Service: We pride ourselves on our commitment to customer service. From the moment you walk through our doors, our friendly and knowledgeable staff will be there to answer your questions and guide you through the process. We believe that our customers should feel confident and informed, and we are always here to help.
In conclusion, if you're looking for the best paint protection film shop in the greater Toronto area, look no further. AVOTTO is here to provide you with the best products, expert installation, and exceptional customer service. Our commitment to cleanliness, quality, and affordability sets us apart from the rest, and we are proud to be the best paint protection film shop in town. Contact us today to learn more about our services and to schedule your appointment
Protect Your Car's Paint with Paint Protection Film: Why It's Important in Canada
Canada is known for its harsh weather conditions, including long and harsh winters, as well as scorching hot summers. These conditions can take a toll on your car's paint, leading to unsightly scratches, chips, and fading. To protect your vehicle's paint and keep it looking new, it's important to consider wrapping it with paint protection film (PPF). In this blog, we will discuss the benefits of PPF and why it's an essential investment for drivers in Canada.
Protects against weather-related damage: As mentioned earlier, the weather in Canada can be tough on your car's paint. PPF provides a barrier between your car's paint and the elements, helping to protect it from damage caused by snow, ice, and rain. The film also blocks harmful UV rays that can cause fading and discoloration.
Prevents road debris damage: Another common problem for Canadian drivers is the damage caused by road debris such as stones, sand, and gravel. These small particles can cause chips and scratches in your car's paint, but with PPF, they will simply bounce off, leaving your paint unscathed.
Increases resale value: Maintaining the appearance of your car is important not only for your own enjoyment, but also for its resale value. A well-maintained car with a protected paint job will always command a higher price than one that has been left to the elements.
Easy to maintain: PPF is also much easier to maintain than your car's paint. You can simply wash it with soap and water, and it will look as good as new. Unlike a ceramic coating, you don't need to reapply PPF every few years.
Wide range of options: There are many different types of PPF on the market, each with its own unique benefits. Some films are specifically designed to provide maximum protection against the elements, while others are designed to enhance the appearance of your car. You can choose the film that best suits your needs and budget.
In conclusion, PPF is a must-have for drivers in Canada. With its ability to protect your car's paint from the harsh weather conditions and road debris, you can enjoy peace of mind knowing that your investment is protected. Whether you're a car enthusiast who wants to keep your vehicle looking new, or you're simply looking to protect your resale value, PPF is an investment that is well worth the cost
The Truth About Ceramic Coatings: How Long Do They Really Last?
Ceramic coatings have become increasingly popular among car owners who want to protect their vehicle's paint and make it shine. Manufacturers of ceramic coatings often claim that their products can last for 5 years or more, but is this really the case? In this blog, we will examine the longevity of ceramic coatings and what you need to know to make sure you get the most out of your investment.
First of all, it's important to understand that ceramic coatings are not a one-time solution. They are a protective layer that helps to shield your car's paint from the elements, such as rain, snow, and UV rays. The longevity of a ceramic coating will depend on several factors, including the quality of the product, the type of car, and how the car is maintained.
If you properly maintain your ceramic coating, it can last for 5 years or more, as manufacturers claim. However, if you neglect to properly care for your coating, it may deteriorate much sooner. For example, if you frequently wash your car with harsh chemicals or if you park it in a place where it is exposed to the elements for extended periods of time, your ceramic coating may wear out more quickly.
It's also important to understand that ceramic coatings are not a lifetime solution, despite what some professionals might tell you. While ceramic coatings can provide excellent protection for your car's paint, they will eventually wear out and will need to be reapplied.
However, if you hypothetically coated a car and parked it in a garage and never drove it, the coating would technically last forever. It's only when the coating is exposed to the elements and is subject to wear and tear that it will begin to deteriorate.
In conclusion, ceramic coatings can be a great investment for car owners who want to protect their vehicle's paint and keep it looking new. However, it's important to properly maintain your coating and understand that it is not a lifetime solution. By following the manufacturer's recommendations for care and maintenance, you can help ensure that your ceramic coating lasts for the full 5 years or more. So, if you're considering a ceramic coating for your car, take the time to understand what it takes to get the most out of your investment.
The Ultimate Guide to Paint Protection Films: XPEL vs. 3M vs. SUNTEK
If you're a car owner looking to protect your vehicle's paint from scratches, chips, and other types of damage, paint protection film (PPF) is an excellent option. However, with so many different brands and types of PPF on the market, it can be difficult to know which one to choose. In this blog, we will compare three of the most popular brands of PPF - XPEL, 3M, and SUNTEK - and explain why XPEL is the best choice for customers who want the highest quality and best performance.
XPEL is a leading manufacturer of paint protection films, known for its innovative products and commitment to quality. XPEL's PPF is made from a unique and patented material that is self-healing, meaning it can recover from small scratches and dings on its own. This makes it ideal for car owners who want a durable and long-lasting solution for protecting their vehicles. XPEL's PPF is also highly flexible and conforms well to curves and contours, making it a great choice for sports cars, luxury vehicles, and other types of cars with complex shapes.
3M is another popular brand of paint protection film, known for its advanced materials and innovative technologies. 3M's PPF is made from a clear, scratch-resistant material that is designed to protect the paint from damage. While 3M's PPF is a good choice for some car owners, it may not be as effective as XPEL's PPF when it comes to resisting scratches and other types of damage. In addition, 3M's PPF may not be as flexible as XPEL's PPF, making it more difficult to apply to complex shapes.
SUNTEK is a lesser-known brand of paint protection film, but it is still a good choice for some car owners. SUNTEK's PPF is made from a clear, flexible material that is designed to protect the paint from scratches and other types of damage. However, SUNTEK's PPF may not be as effective as XPEL's PPF when it comes to resisting scratches, and it may not be as long-lasting.
In conclusion, when it comes to purchasing paint protection film, XPEL is the best choice for customers who want the highest quality and best performance. XPEL's PPF is made from a unique and patented material that is self-healing, flexible, and conforms well to curves and contours. In addition, XPEL's PPF is highly effective at resisting scratches and other types of damage, making it a great choice for car owners who want to protect their vehicles for years to come. So, if you're looking for the best paint protection film for your car, choose XPEL today.
Why Wrapping Your Tesla's Paint is a Smart Investment
Tesla's sleek and futuristic electric vehicles are highly coveted for their cutting-edge technology and sleek, aerodynamic design. However, Tesla's clear coat is often considered one of the weakest and most susceptible to scratches compared to other vehicles on the market today. This can be a major concern for Tesla owners who want to maintain the appearance of their vehicles for years to come.
The clear coat on a Tesla is a layer of clear paint that is applied over the basecoat. This layer protects the basecoat from damage and enhances its shine. However, the clear coat on a Tesla is particularly susceptible to scratches due to its thin and delicate nature. In addition, Tesla's advanced and unique paint process, which includes a high-gloss finish and a lack of primer, can make the clear coat even more vulnerable to damage.
The good news is that there are several ways to protect your Tesla's clear coat and prevent scratches. One of the most popular and effective methods is to wrap the vehicle in a clear or colored protective film (PPF). This film is a clear, self-healing, and UV-resistant material that can be applied to the vehicle's paint to protect it from scratches, chips, and other types of damage. PPF is also removable, which means it can be taken off without damaging the paint underneath.
Another option for protecting your Tesla's paint is to have a ceramic coating applied. Ceramic coatings are a type of liquid polymer that can be applied to the vehicle's paint to provide a layer of protection from scratches, UV rays, and other forms of damage. This type of coating is particularly effective at resisting scratches and can last for several years with proper maintenance.
In conclusion, protecting your Tesla's paint with PPF or a ceramic coating is an investment that will pay off in the long run. Not only will it keep your vehicle looking its best for years to come, but it will also help you avoid costly repairs and resprays. So, if you're a Tesla owner looking to keep your vehicle in top condition, consider wrapping or coating your paint today.
Didn’t Paint Protection Film have a history of turning yellowish?
Paint protection film (PPF) is a clear plastic film that is applied to the exterior of a vehicle to protect it from scratches, chips, and other types of damage. It was initially designed to help keep a vehicle's paint job looking new for longer, but a common issue with older versions of PPF was that they would turn yellow over time, ruining the look of the vehicle. This yellowing effect was due to the degradation of the film's properties as it was exposed to UV light, heat, and other environmental factors.
However, advances in technology and materials science have led to the development of new PPF films that no longer suffer from the yellowing issue. The new films are made with advanced polyurethane materials that are resistant to UV light and environmental degradation, ensuring that the film stays clear and maintains its protective properties for years to come.
Some of the key features of the new PPF films include:
UV-resistant materials that prevent yellowing and deterioration of the film
Self-healing properties that help to maintain the film's clear appearance over time
Durable construction that offers long-lasting protection for a vehicle's paint job
In conclusion, if you're looking for an effective way to protect your vehicle from damage and maintain its appearance, investing in a high-quality paint protection film is an excellent option. The new films on the market offer superior protection and resistance to yellowing, ensuring that your vehicle will look great for years to come.
Is it worth tinting my windshield on my car, even with 70% Ceramic Tint?
Installing XPEL XR Ceramic Tint on your windshield is certainly a smart choice - even with a relatively clear 70% tint, it offers one of the highest heat rejection rates compared to other window tints. That’s especially important for the front windshield, which is where most of the heat enters your car on hot days. In addition to rejecting heat, a 70% tint also adds a hint of shade and style to your vehicle’s look from the outside; you won't get any mirrored back glare when driving towards the sun while still maintaining visibility.
When it comes to legality, it’s worth noting that in most US states and Canadian provinces, it's against the law to tint your windscreen. However, this product is almost virtually invisible and so won't be noticed by an untrained eye - allowing you to get all the benefits without having to worry about any legal issues. So if you're looking for a way to keep cool during peak summer months and protect yourself from harmful rays too - professional installation of XPEL XR Ceramic Tint is an excellent option!
How to properly maintain your vehicle
If you drive a high end car, you know the importance of keeping it looking its best. You want to make sure your car is always shining and looking as pristine as possible. Washing your car is essential for maintaining your car’s exterior, but it can be difficult to find the right way to properly clean and protect your vehicle. That’s why we recommend the two bucket method for washing your high end car. With this method, you can avoid costly professional car washes and maintain a showroom-level shine on your own!
What Is The Two Bucket Method?
The two bucket method is an easy and efficient way to wash any vehicle, but especially luxury cars with special coatings or paint finishes. It requires two buckets: one filled with soapy water and one filled with clean water. In addition, you need a good quality microfiber mitt or sponge and a chamois cloth for drying. This simple setup will help protect your vehicle from scratches and swirl marks that occur when dirt particles are rubbed over the surface during washing.
How To Use The Two Bucket Method
First, fill one bucket with soapy water mixed with an approved auto shampoo or soap specifically designed for luxury vehicles. Fill the second bucket with clean water only; no soap or cleaners should be added here. Start by rinsing off the entire car with a hose to remove all dirt and debris from the surface, then submerge your mitt in the soapy water before gently wiping down each panel of the vehicle’s exterior in a back-and-forth motion until fully cleaned. Rinse off each panel between wipes using clean water from the second bucket; this will keep dirt particles suspended in the soapy water instead of scratching up any surfaces while scrubbing them clean. After all panels are washed, use a chamois cloth to dry off any remaining moisture before applying wax or sealant if desired.
Be Careful Who You Trust With Your Car
It may seem tempting to take advantage of automatic car washes or even hire someone else to wash your car for you; however, these are both risky options that can end up damaging your vehicle more than helping it look its best! Automatic car washes often apply too much pressure onto surfaces which can cause scratches and swirl marks; similarly, hiring someone who is not experienced in handling high end cars could lead to similar results due to lack of knowledge about proper techniques for cleaning delicate paint jobs or coatings on luxury cars. Stick to handwashing your own car whenever possible—it’s worth it in terms of protecting valuable investments like luxury vehicles!
Conclusion:
When it comes to washing cars, handwashing is always best! By using the two bucket method when cleaning high end cars, you can ensure that no damage occurs while still achieving that showroom level shine everyone wants their cars looking like they just rolled out of the dealership lot! Avoiding automatic car washes and being careful who you trust with regularly washing your luxury vehicle will help preserve its value while also keeping it looking great over a long period of time – much longer than quick trips through automatic washes ever could! Trusting yourself (or carefully chosen professionals) with properly following this technique will go miles in making sure both you and other drivers admire how good your car looks wherever you drive around town!
Why chose AVOTTO to install your Xpel PPF?
When it comes to installing Xpel Ultimate Plus Paint Protection film, you want a professional installation that will make your car look its best. We understand this, and we are committed to making sure our customers get the highest quality installation available. In this blog post, we’ll discuss why you should choose us over our competition when it comes to installing Xpel paint protection films.
Expertise and Experience
Our team has years of experience in the industry and is well-versed in all aspects of automotive detailing and paint protection film installation. We understand the nuances of applying paint protection films, so you can be sure that your vehicle will get the best possible installation. We also use only top-of-the-line materials and tools, ensuring that your vehicle is protected from damage caused by everyday wear and tear.
Quality Assurance Guarantee
At AVOTTO, we offer a Quality Assurance Guarantee on all our installations. This means that if something does go wrong with your installation due to our fault or negligence, we'll take responsibility for correcting it for free within the first year after installation. We stand behind our work and are committed to making sure our customers are completely satisfied with their installations.
Flexible Appointment Times
We understand that everyone has busy schedules, so we offer flexible appointment times so that you can get your car wrapped at a time that works for you. Our team is also available for any questions or concerns you may have about your wrap job before, during, and after installation.
Conclusion:
When it comes to Xpel Paint Protection film installations, there's no better team than ours! With years of experience in the industry and a commitment to providing top-notch customer service, you can trust us to provide a professional job every time. So don't wait – contact us today to learn more about how we can help protect your vehicle with one of our high-quality wraps!
Paint Protection Film or Ceramic Coating?
Paint protection film (PPF) and ceramic coating are both popular options for protecting your car's paint from scratches, chips, and other types of damage. However, when it comes to durability and performance, paint protection film comes out on top.
One of the main advantages of PPF is its durability. It is made of a clear, urethane film that is extremely resistant to scratches, chips, and other types of damage. The film is also highly resistant to fading and discoloration, so it will continue to protect your car's paint for years to come.
Ceramic coating, on the other hand, is a liquid that is applied to the car's paint. While it can provide some level of protection, it is not as durable as PPF. Ceramic coating can be easily scratched, chipped, and damaged, and it will eventually wear off over time.
Another advantage of PPF is that it is self-healing, meaning that it will repair itself when it gets scratched. This is because PPF is made of a thermoplastic elastomeric material, which allows the film to stretch and move, unlike ceramic coating which is a liquid and does not have this feature.
PPF also offers better protection from harsh environmental factors such as UV rays, acid rain, and bird droppings. It is also resistant to chemical and high-pressure washes, which makes it easy to maintain and keep your car looking great.
In terms of aesthetics, PPF is virtually invisible and does not change the color or the appearance of your car's paint. Ceramic coating, on the other hand, can affect the color of your car's paint and can be visible if not applied correctly.
In conclusion, paint protection film is a more durable and better option than ceramic coating for protecting your car's paint. Its self-healing properties, UV resistance, and easy maintenance makes it the ideal choice for car enthusiasts who want to keep their car looking like new for years to come.
Why its important to protect your Tesla with Xpel PPF
From the top, I just want to emphasize that it’s ideal to wrap your vehicle in Paint Protection Film no matter what the brand of the vehicle you own is. But, it’s that much more wise, and financially efficient to wrap cars that are known to have a sensitive/soft paint job.
The top 3 manufactures (in our experience) that have the most softest clear coat are:
1- Tesla
2- Lexus
3- Bentley
4- Honda
The difference between a car that has a weaker clear coat vs a very strong one is that the car with the weaker clear coat is much more prone to swirl marks, scratching, and marring. Ultimately leaving your with a car that (when the sun shines on the paint work), you see a bunch of spider web scratches all over the paint. This could be a result of using a drive through car wash, using a snow brush, and simply washing it incorrectly. You may want to consider adding some protection. In that case you’ll have 3 options to choose from.
From the least expensive to the most expensive, it goes as follows:
1. Wax-4-6 weeks of protection
2. Ceramic Coating- 2-5 Year protection
3. Paint Protection Film- 10+ Years
All these options add a layer/layers of protection to your clear coat. The wax is applied as either as a liquid or a paste, then wiped off. The Ceramic Coating goes on the vehicle as a liquid and then solidifies into a glass coating (another name of Ceramic Coating). Then the Xpel Paint Protection film is installed as is, using what is called a “slip solution” then squeegeed into place. Acting as a transparent skin on the surface of your paint. Not only does PPF (paint protection film) protect your car, but it also enhances your paint. It truly adds a beautiful, noticeable gloss. Making it the ultimate way to protect your paint. And at the same time, the most costly. As proud sponsors of the Tesla Owners Club of Ontario I will be using Tesla as an example. To wrap a Tesla Model Y in Paint Protection Film you should be looking to spend anywhere from $5000-$6000 CAD. But if you decided to opt for wrapping only the front-end of your Tesla Model 3 for example. You should be prepared to spend anywhere from $1850-$2000 CAD. Depending on who you hire, and the quality of both their install and shop hygiene.
We cannot emphasis the importance of shop hygiene enough when selecting a good PPF installer. When installing Xpel Paint Protection Film, what separates the good installers from the bad is the amount of dust, hair, and general debris left behind under the film when receiving it back from them. I wouldn’t expect 100% perfection though. After all, it’s called “Paint Protection film” not “Paint Perfection Film”. Some of even the best installers in the world leave some debris behind because they are only as good as the shop they install it in. And it’s next to impossible to install a PPF job on a vehicle without having at least 3-5 dust marks left behind. So, it’s safe to say a professional installer (like ourselves) you may have anywhere from 2-3 tiny dust particles left under your film, worst case scenario. This applies to our tint work as well. Anyone who says they can install it 100% perfectly with ZERO dust marks is lying to you. With over 10 years of experience in this business, I have yet to see even 1 job thats 100% dust free for both window tint and PPF installs.
However, we are perfectionist and we do stand by our work. So, if you do decide to hire us and you notice more than a few dust marks. Without a doubt, we will replace that component so that the job is then 100% perfect:)
How to maintain a Ceramic Coating
Maintaining a ceramic coated vehicle is crucial to preserving the longevity and shine of the coating. A ceramic coating is a liquid polymer that is applied to the paint of a vehicle, creating a protective barrier that repels dirt, grime, and other contaminants. It also provides a hydrophobic effect, which means that water will bead up and roll off the surface of the vehicle, rather than sticking to it and potentially causing damage. To ensure that your ceramic coated vehicle stays in top condition, here are some maintenance tips to follow:
Regularly wash your car: Regular washing is essential to keep your ceramic coating in good condition. Use a pH-neutral car wash soap and a microfiber wash mitt to gently remove dirt and grime from the surface of your vehicle. Avoid using pressure washers or harsh brushes as they can damage the coating.
Dry your car properly: After washing your car, be sure to dry it off completely to prevent water spots from forming on the surface. Use a microfiber towel or a chamois to gently dry the surface of your vehicle.
Avoid harsh chemicals: Some chemicals, such as tire shine and wax, can damage the ceramic coating. Be sure to read the labels of any products you use on your vehicle and avoid those that contain harsh chemicals.
Park in a shaded area: The sun can cause your ceramic coating to fade over time. Parking your car in a shaded area or using a car cover will help to protect the coating from UV rays.
Keep an eye on the coating's condition: Regularly inspect your ceramic coating for any signs of wear or damage. If you notice any issues, contact a professional for touch-ups or reapplication.
By following these tips, you can help ensure that your ceramic coated vehicle stays looking like new for years to come. Remember that regular maintenance is key to preserving the longevity and shine of your ceramic coating.
“If I were to protect my car in Xpel PPF and be on a budget. What panels take priority?”
It all begins with answering 2 questions first:
What’s is your budget? And how much do you love your car?
What we tell all of our customers is that if you were to protect only one component on your vehicle with Xpel PPF, we recommend you opt for the Front Bumper Coverage.
Second, to that, we would recommend wrapping the hood. Over the years of seeing 1000’s customers' cars, we’ve noticed a pattern. The two components that get mangled with rock chips the most are without a doubt the hood and the front bumper. Making them the highest impact area on your vehicle.
Another reason why coverage on these areas is so important is that when we get a customer request to restore their paint job (after having owned it for several years) to new again, we can always restore the paint on every panel back to perfection EVERYWHERE except…
yup… You guessed it! The Hood and the Front Bumper.
And the reason why we can’t get it back to 100% is mostly because of all the sandblasting, and rock chips left behind after driving thousands of miles on Toronto roads. Anyone who knows of the 401 knows that the air isn’t pure. Including all sorts of things from vehicles brake dust + construction road work.
The only way to repair your bumper at this point is to repaint it. Which just for the bumper alone could cost anywhere from $650-$1500. Depending on several things of course. Like how expensive your paint is, how difficult the painting process is, and how experienced/talented the painter you hire is. Hard to find good painters in Canada in our experience. However we’ve been using Champion Motors in Toronto Ontario for our paintwork/paint restoration, and they’ve been the best in Toronto in our opinion.
So, if you are on a little bit of a budget and are only going to protect 1- 2 areas after picking up your brand new car, it would be ideal to install nothing but Xpel PPF on both the Front Bumper and Hood.
Now, if those 2 impact areas were previously protected, we could have easily removed the old paint protection film. Leaving the paint underneath un-touched by any rock chips or blemishes, therefore, allowing us as Paint Correction specialists to complete the customer's car back to 100%. As we don’t stop until its perfect:)
The alternative to that would be to repaint the hood and bumper which is twice as expensive and it makes selling your car much more difficult because once a future potential buyer hears that you have repainted the hood and bumper. They will assume it’s been in a front-end collision. NOBODY likes to hear “these panels were repainted”. As people tend to assume the worst-case scenario when buying a used vehicle.
Aside from rock chips making your vehicle look worn out, old and less desirable. It also rusts (if the component is metal, like the hood). The bumper on the other hand is plastic on 80% of vehicles. And for or those who don’t know, rust is like covid. It spreads.
Be safe…Wrap the whole vehicle;)
Paint Protection Film Installation in Toronto
It all begins with an idea.
The natural life cycle of almost every vehicle includes normal wear and tear. Scratches happen, bumps occur, and most people are ready and willing to accept this as their reality. However, in our eyes, your vehicle should not be subjected to these mundane and easily avoidable problems. You spent hard-earned capital on your automobile. We respect that and feel you more than deserve an additional shield to safeguard your investment.
Our expert team will provide you that defense in the form of Xpel paint protection film installation in Toronto. Vehicle protection services come in various forms, with paint protection film the most crucial of them all. By opting for paint protection film installation in Toronto, you are adding an additional unnoticeable layer of clear, colored, or patterned security that repels scratches, dings, and nicks from ever penetrating your vehicle’s most vulnerable top layer of paint.
Aside from the obvious scratches that result from everyday incidents like vehicles kicking up debris on the highway and objects coming into contact with the exterior, there are other factors that come into play that could cause serious long-term harm to a vehicle’s surface. The sun is truly a mighty beast, and if your vehicle is left outdoors, its factory paint could crack, chip, and peel from exposure to the elements. All of this, of course, could be completely avoided just by opting for a simple paint protection film installation in Toronto.
Our crew is fully equipped with top-of-the-line training before they get hands on a vehicle. This ensures that your automobile receives the highest level of expert care and attentiveness with every interaction. We will not cease until you are completely satisfied with the final touches made to your motor vehicle—that is AVOTTO’s mission. We aim to not only maintain our objective, but to surpass expectations, snuff out any weakness, and transform your ordinary mode of transportation into an utterly supreme, performance-enhanced automotive dream.
Ceramic Coating Services in Toronto
It all begins with an idea.
It is a known fact that every day, hundreds of car factories push out thousands of vehicles all around the world. To say that their manufacturing is generic and basic is an understatement. There are simply too many moving parts, and they do not have the ability nor the required professionalism to take the time and ensure that every individual vehicle is fully able to withstand the day-to-day trials that all vehicles experience. This is where our professional team of expert technicians step in. We take the time to speak with you directly and personally, and we figure out what is specifically best for your car and your needs. We have the ability and are brimming with desire to upgrade your automobile.
What your vehicle requires is one of our ceramic coating services in Toronto. By opting for this protective process, your mind will be at ease and your car will be able to withstand the rigors of the road. Ceramic coating will also extend the life of your vehicle’s exterior, keeping it looking as sharp and pristine as the day you drove it off the lot. Choosing this route is but a small initial maneuver that in turn offers your car a massive amount of daily protection. It goes to show you just how important the little things are.
Our top ceramic coating service in Toronto encases your vehicle with a strong layer of fortified protection against any outside elements that it may come into contact with. We also take extra precautions by offering our customers a two-year protection plan with IGL Quartz and a 4-year protection plan with IGL Kenzo and Xpel Fusion Plus coatings. These additional protections are the final touch of all the amenities and services that we are proud to provide for you and your vehicle.
A little bit about why we work is IGL Coatings. We are proud to offer IGL products because unlike our competitors like Ceramic Pro, IGL Coatings manufactures its own coatings. So when it comes to warranty issues. IGL will take your concerns to heart and figure out a way to solve the problem. They stand by their products. When you outsource your coatings it’s much easier to pawn the customer off to somewhere else. In fact, IGL is a manufacturer of a lot of other Ceramic Coating companies. They reside in Malaysia. The chemical capital of the world.